Filter
Top Products
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
! The default setting for AF is off.
1 Use MULTI-CONTROL to select
Alternative FREQ in the function menu.
Alternative FREQ appears in the display.
2 Press MULTI-CONTROL to turn AF on.
ON appears in the display.
# To turn AF off, press MULTI-CONTROL again.
Notes
! Only RDS stations are tuned in during seek
tuning or BSMwhen AFis on.
! When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the station’s AF list. No preset
number appears on the display if the RDS
data for thestation receiveddiffers from that
of the originallystored station.
! Sound may be temporarily interrupted by an-
other program during an AF frequency
search.
! AF can be turned on or off independently for
each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI seek is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
! The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 86.
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Use MULTI-CONTROL to select Regional
in the function menu.
Regional appears in the display.
2 Press MULTI-CONTROL to turn the re-
gional function on.
ON appears in the display.
# To turn the regional function off, press
MULTI-CONTROL again.
Notes
! Regional programming and regional networks
are organized differently dependingon the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear on the dis-
play if the tuner tunes in a regionalstation
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FMband.
RDS
En
22
Section
05