Filter
Top Products
Turning the clock display
on or off
You can turn the clock display on or off.
% Press 0 to turn the clock display on or
off.
Each press of 0 turns the clock display on or
off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing 0 turns the clock
display on or off.
Using different
entertainment displays
You can enjoy entertainment displays while lis-
tening to each sound source.
! These are different ways of displaying the
spectrum and do not affect sound output.
% Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Source icon displayBack ground visual 1
Back ground visual 2Back ground visual 3
Back ground visual 4Movie screen 1
Movie screen 2Entertainment clockdis-
play off
Setting the digital source title
The title displayed for the digital sources (e.g.,
Digital1) can be changed.
1 After you have selected digital sources
as the source, press o and hold until
TITLE appears in the display.
2 Input the title.
To input the titles, refer to Title input on the
next page.
Setting the analog source title
The title displayed for the analog sources (e.g.,
Analog1) can be changed.
1 After you have selected analog sources
as the source, press o and hold until
TITLE appears in the display.
2 Input the title.
To input the titles, refer to Title input on the
next page.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.
Selecting AUX as the source
% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 34.
Other Functions
En
36
Section
09