Filter
Top Products
Switching the digital
source setting
It is possible to connect DVD player to this
unit. Activate the digital source when using
DVD player connected to this unit.
Initially, both Digital1 and Digital2 are set to
off.
1 Press o to select Digital.
Press o until Digital (e.g., Digital1) ap-
pears in the display.
2 Press r to turn digital setting on.
# To turn digital setting off, press q.
Switching the analog input
setting
It is possible to connect various equipment to
this units speaker input or RCA input. Acti-
vate the analog setting when using such
equipment connected to this unit, and select
the input according to the connecting meth-
od.
1 Press o to select Analog.
Press o until Analog (e.g., Analog1) ap-
pears in the display.
2 Press r to turn analog setting on.
Connection method (e.g., SP) appears in the
display.
3 Press m or n to select a desired con-
nection method.
Pressing m or n will switch between SP
and RCA and that status will be displayed.
# To turn analog input setting off, press q.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
1 Press F to select Audio Reset.
Press FUNC repeatedly until Audio Reset ap-
pears in the display.
2 Press r to display Reset OK?.
Reset OK? appears in the display.
# To cancel resetting the audio functions, press
BAND/ESC.
3 Press n to display Really?.
Really? appears in the display.
4 Press r to reset audio functions.
Complete appears in the display.
Initial Settings
En
35
English
Section
08