Filter
Top Products
You can use this unit with a separately sold TV
tuner.
For details concerning operation, refer to the
TV tuners operation manuals. This section
provides information on TV operations with
this unit which differs from that described in
the TV tuners operation manual.
Important
You can use the following functions only when
the remote control is set to DEQ mode.
Using the TV tuner
1 Press SOURCE to select the Television.
2 Use VOLUME to adjust the sound level.
3 Press BAND to select a band.
4 To perform manual tuning, press m or
n with quick presses.
5 To perform seek tuning, press and hold
m or n for about one second and re-
lease.
Storing and recalling
broadcast stations
% When you find a station that you want
to store in memory press one of preset tun-
ing buttons 16 and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
Notes
! Up to 12 stations, six for each of two TV bands
can be stored in memory.
! You can also recall station assigned to preset
tuning buttons 16 by pressing q or r.
Storing the strongest
broadcast stations
sequentially
1 Press o to select BSSM.
Press o until BSSM appears in the display.
2 Press r to turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancel the storage process, press q.
Note
Storing broadcast frequencies with BSSM may
replace broadcast frequencies you have saved
using 16.
TV tuner
En
13
English
Section
05