Filter
Top Products
EN
8
Functional overview
Wireless Music Receiver
1 Infrared sensor
Receives the signals from the remote control
2 LCD screen
Displays menu status for easy navigation through music library and system settings
3 Stereo 1/8” connector cable socket
4 Power adapter cable socket
5 Reset hole
Remote Control
1 HOME
Displays the top level menu.
Turns on the SLA5500 when the SLA5500 is switched in Standby mode.
2 0-9 digit buttons
Play the item stored on the preset number selected (0 to 9).
In Edit mode: Key 0-9 is used to enter numbers and/or characters (ex: 2abcABC).
Key 1 is also used for special symbols (1 . , ? ! - & * # _ ~)
3 PRESET
Press this button followed by one of the number buttons (0-9) to store the currently
selected item against the preset number selected.
4 (UN)MARK
Press this button once to add the song currently playing to the Dynamic Playlist.
When playing Dynamic Playlist: press to remove from Dynamic Playlist.
5 3 (UP)
Scrolls up through the current menu list (hold the button down to scroll faster)
In Edit mode: enter or change characters by scrolling up through the ASCII character
table.
4 (DOWN)
Scrolls down through the current menu list (hold the button down to scroll faster)
In Edit mode: enter or change characters by scrolling down through the ASCII
character table.
1 (LEFT)
Moves up one level up in the menu hierarchy on the LCD display.
Example: if artist is displayed, pressing Left returns you to the PC Files menu.
In Edit mode: Moves the cursor to the left, one character at the time.
2 (RIGHT)
Selects the current highlighted menu item
Example: If the currently displayed item is an album, pressing Right will display a list of
all songs of that album
In Edit mode: Moves the cursor to the right, one character at the time and confirms
inputs.
6 SYSTEM
Displays the top level of the Configuration menu.
7 SHUFFLE
Toggles between random and ordered playback modes in the current folder.
Note: The selected mode is stored permanently until you press the Shuffle button again or
until the products will be switched off (StandBy mode).