Filter
Top Products
EN
28
Subnet Mask Subnet mask for the network to which
the SLA5500 is connected.
Gateway IP address of the gateway used by the
SLA5500.
DNS Server Preferred IP address of the preferred DNS server
used by the SLA5500.
DNS Server Alternate IP address of an alternate DNS server
used by the SLA5500.
Proxy Server Indicates whether or not traffic to and
from the Internet must first pass through
a proxy server (Disabled/Enabled).
Proxy Hostname Name of the proxy server host
computer to which the SLA5500 is
connected.
Proxy Port Port on the proxy server to which the
SLA5500 is connected.
Managing Network Profiles
If there have been changes to your wireless network configuration since you installed
your SLA5500, or if you are experiencing problems when using the SLA5500, you
may need to change the network profile settings using the Configuration Wizard.
Note: Changing network settings requires some technical knowledge of how your
wireless network is set up. If you are unsure of any of the settings, consult the person
who set up your wireless network or refer to the appropriate network documentation.
Changing Settings for the Currently Active Network
Profile
1 Press SYSTEM (6) on the remote control to display the Configuration menu.
2 Press 4 until ‘Configuration Wizard’ is highlighted. Press 2.
3 Now follow the steps under ‘Changing Network Settings’ to change the network
profile settings for the currently active profile.
Changing your display menu language
1 Press SYSTEM (6) on the remote control to display the Configuration menu.
2 Press 4 until ‘Select Language’ is highlighted. Press 2.
3 Select the desired display menu language.