Filter
Top Products
EN
17
Before You Start
• Make sure that your wireless network is active.
• If your base station has Media Access Control (MAC) filtering enabled, make sure
that the SLA5500’s MAC address is added to the Access Control List of your
base station. For details see ‘MAC Address Control on the Wireless Network’.
• If you are using a firewall, make sure that your firewall is correctly configured for
use with the SLA5500.
See ‘Extra information’ for more details.
Connecting the SLA5500
1 Insert batteries and make sure it is correctly positioned as indicated by the
engraved symbols.
2 Connect the 1.8” plug of the cable to the audio socket on the SLA5500.
Connect the other end to the AUX input of your audio system amplifier
(2x RCA).
3 Connect the power cable to the power socket on the Wireless Music Receiver
and connect it to the power supply.
The Wireless Music Receiver should power on automatically after a few seconds.
(if it does not, press the
yy
button on the remote control).
4 Select your display menu language: English, Français, Italiano, Deutsch, Español, or
Nederlands.
Use
3 and 4 to select. Confirm with OK or 2.
The Wireless Music Receiver will automatically search for a currently available wireless
network and start the Configuration Wizard on the device.
Installing your SLA5500