Filter
Top Products
17
English
point 2
Slow
1 Press SLOW on the remote control to watch a
VCD at a slower speed. There are 3 types of
slow modes to select.
➜ The sound will be muted.
➜ On TV screen, “SLOW 1/2”, “SLOW 1/4” or
“SLOW 1/8” will be displayed.
2 To resume playback at normal speed, press
SLOW repeatedly until “PLAY” appears on the
TV screen or press 2Å.
A-B repeat
This feature is also applicable to audio CD
(except for MP3-CD). To Play a certain scene or
passage of the disc repeatedly.
1 Press A-B on the remote control during
playback to mark the start point of the chosen
scene or passage.
➜ “A
=
” will appear on the display.
➜ “B” will start flashing.
2 Press A-B again to mark the end of the chosen
scene or passage.
➜ “A
=
B” will appear on the display.
➜ The selected scene or passage will start
playing repeatedly.
3 Press A-B once more to return to normal
playback.
➜ “A
=
B” will disappear from the display.
Notes:
– You can also cancel A-B repeat by pressing
S
or
T
.
– A-B repeat marking can cross from one track to
another. But for VCD 2.0, you can only able to set
the A-B repeat marking within the same track.
Resume
● In stop mode, press RESUME on the remote
control to start playback again from where you
have stopped.
Note:
– Resume will not be available if you have
changed the disc, opened the disc tray or
disconnected the system the power supply.
CD / VCD / MP3-CD
View
This feature allows you to scan through a VCD for
a quick review. PBC mode must be switched off.
1 Press VIEW on the remote control.
➜ On TV screen, 9 pictures will be displayed. To
view the previous/next page, press
S
or
T
.
➜ The first 20 seconds of each track will be
played.
2 To exit review mode, press digits 0 – 9, +10 to
playback the desired track or 2Å to play the
current selected track.
Note:
– If the disc is AVCD disc and there’re no video
tracks on the same viewed page, cannot use the
direct digital key to play the track.
Return
● Press RETURN on the remote control to
return to the previous VCD disc MENU level. It
is functional only for Video CD when PBC is
switched on.
Key ( I È i )
This feature allows you to change the key tone
of your vocal range.
1 Press KEY on the remote control.
➜ The last selected key tone level will be
displayed.
● Press KEY again to change the tone level to “0”.
2 Press VOLUME 3 or 4 to adjust the key tone.
➜ The key tone level can be increase or
decrease between level +8 and -8.
MIC Volume and Echo
This feature allows you to add echo while singing
or talking through a microphone.
To adjust microphone volume level
1 Press MIC/ECHO on the remote control
repeatedly until “MIC X” is displayed.
2 Press VOLUME 3 or 4 to increase or
decrease the MIC volume.
➜ The volume level will be displayed.
To adjust echo level
1 Press MIC/ECHO on the remote control
repeatedly until “ECHO X” is displayed.
2 Press VOLUME 3 or 4 to increase or
decrease the echo level.
➜ The echo level will be displayed.
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM17