Filter
Top Products
15
English
point 2
Notes:
–"P" represents PROGRAMME and "T"
represents TRACK, "XX" is the current selected
Programme or Track number.
– The programming is automatically cleared as
soon as the CD compartment is opened.
– The function of programme setting is disable in
PLAY/PAUSE mode.
– Programme cannot be used for VCDs when PBC
is switched on. Switch off PBC before storing tracks
from such a VCD.
For MP3-CD only
1 In stop mode, press PROGRAM.
➜ PROG will start flashing and “AXX TXXX” will
be displayed.
➜ On TV screen, “PXX AXX TXX?” and
“PROGRAM” will be displayed.
2 Press and hold
S
/
T
to select the desired
ALBUM and press
S
/
T
repeatedly (or
digits 0 – 9, +10 on the remote control) to
select the desired TRACK for programming.
3 Press PROGRAM to store the selection.
➜ “PXX OK” will appear on the display briefly
and the programmed album and track number
will be displayed.
➜ PROG will remain on the display.
● Repeat steps 1 to 3 to store other desired
album and track.
● Press
S
or
T
in stop mode can review the
programme sequence.
➜ “PXX AXX TXXX” will scroll through briefly.
● Press OSD in stop mode to show the
programme information.
➜ The Album’s name and Track’s name will scroll
through briefly.
4 Press 2Å to start programme playback. You can
press
S
/
T
to select the programmed track
to play.
5 Press 9 once stop programme playback or
twice to clear the programme.
Shuffle
You can play all the tracks in random order.
1 During playing, pause or stop mode, press
SHUFFLE (VCD) to enable SHUFFLE play
mode.
➜ SHUFFLE will appear on the display.
2 To exit shuffle mode, press SHUFFLE (VCD)
again or 9.
➜ SHUFFLE will disappear from the display.
Note:
– If the Shuffle function enabled, and the Repeat
function is set on, will disable the Shuffle play
mode.
Repeat
You can play the current track or the whole disc
repeatedly.
1 During CD Playing or Pause mode, press
REPEAT on the remote control or
REPEAT•DEMO on the system to select
REPEAT 1 or REPEAT ALL mode.
➜ REPEAT 1 – to repeat the current track.
➜ REPEAT ALL – to repeat the whole disc.
● For MP3-CD, you are able to select REPEAT 1,
REPEAT ALL or REPEAT ALB mode.
➜ REPEAT ALB – to repeat the current album.
● The current track or whole disc will now be
played repeatedly until you press 9.
2 To exit the repeat mode, press REPEAT until
the REPEAT 1/REPEAT ALL/REPEAT ALB disappears
from the display.
Notes:
– If the Repeat function is enable, and the Shuffle
function is set on, will disable all the Repeat play
modes.
– If the Repeat function is enable, and the Stop
button is pressed, will disable all the Repeat play
modes.
– In programme mode, you can only select Repeat
1 or Repeat All function.
CD / VCD / MP3-CD
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM15