Filter
Top Products
14
English
point 2
CD / VCD / MP3-CD
Playing a normal disc
1 Press 2Å to start playback.
➜ The track number and elapsed playing time of
the current track appear on the display.
● To interrupt playback, press 2Å.
➜ The playing time will start flashing.
● To resume playback, press 2Å again.
2 To stop playback, press 9.
Selecting a desired track/passage
To select a desired track
● Press
S
or
T
repeatedly (or digits 0 – 9,
+10 on the remote control) until the desired
track appears on the display.
● If playback is stopped, press ÉÅ to start
playback.
To search for a particular passage during
playback
● Press and hold
S
or
T
and release it when
the desired passage is located.
➜ During searching, the volume will be reduced.
For MP3-CD only
To select a desired Album
● Press and hold
S
or
T
until the desired
Album number appear on the display.
➜ “AXX T001” will be displayed and the album
name will scroll through the display briefly.
➜ On TV screen, the arrow will move forward/
backward in the ALBUM menu.
To select a desired Track
● Press
S
or
T
repeatedly to select a desired
track from the current Album.
➜ “A01 TXXX” will be displayed and the track
name will scroll through the display briefly.
➜ On TV screen, the arrow will move forward/
backward in the TRACK menu.
● Use the digital keys on the remote control to
select the track under current Album directly.
To select and playback another track
during playback mode
1 Press
S
or
T
repeatedly to select another
track.
➜ The current track continues playing.
➜ The new selected track will show on the
display screen and TV screen.
2 Press ÉÅ to start playback the new selected
track.
Note:
–"A" represents ALBUM and "T" represents
TRACK, "XX" or "XXX" is the current selected
Album or Track number.
Programming tracks
Programming tracks of disc is possible when
playback is stopped. Up to 20 tracks can be
stored in the memory in any order (except for
MP-3 CD).
1 In stop mode, press PROGRAM to enter
programme setting.
➜ PROG and the current selected track number
will start flashing.
➜ “PXX TXX” will show on the display screen
and TV screen.
2 Press digits 0 – 9, +10 on the remote control
or
S
/
T
to select the desired track.
3 Press PROGRAM to store the select track.
➜ “PXX OK” will show on the display screen
and TV screen.
● Repeat steps 1 to 3 to store other tracks.
4 Press 9 to end programme setting.
➜ PROG will remain on the display.
● Press
S
or
T
in stop mode to review the
programme sequence.
5 Press 2Å to play the programmed tracks.
● If you press REPEAT during programme
playback, the current track or all programmed
tracks will be played repeatedly.
➜ REPEAT 1/REPEAT ALL and PROG will appear
on the display.
6 Press 9 in stop mode to clear the programme.
➜ “PRG CLEAR” will be displayed.
➜ PROG will disappear from the display.
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM14