Filter
Top Products
10
English
point 2
Controls on the system and
remote control
1 STANDBY ON B
– to switch the system on or to Standby mode.
2 DISPLAY SCREEN
– to view the current status of the system.
3 Disc tray
4 VCD / SHUFFLE
– to select CD/VCD mode (this system can
playback MP3-CD format disc). When in CD/
VCD mode, press to start or stop shuffle play
mode.
5 TUNER / BAND
– to select Tuner mode. When in tuner mode,
press to select the waveband: FM or AM.
6 TAPE / REV. MODE
– to select Tape mode. When in tape mode, press
to select AUTO REVERSE.
7 OPEN/CLOSE
– to open or close the disc tray.
8 STEREO/VOCAL
for Tuner .............to switch between stereo/mono
mode (on FM band only).
for CD/VCD .... to set vocal mode.
9 OSD/DIM
– to switch on/off the on screen display on the TV
screen.
– to select DIM HIGH, DIM LOW or LED OFF.
0 VOLUME 3 4
– to increase or decrease the volume.
– to increase or decrease the microphone volume
level, echo level or key tone level.
! DIGITAL SOUND CONTROL (DSC)
– to select the desired sound effect : POP,
CLASSIC, ROCK, JAZZ or FLAT.
– to switch on/off BASS mode.
@ Mode Selection
STOP• CLEAR 9
for CD/VCD/MP3-CD…to stop playback or to
clear a programme.
for Tuner .............to stop programming.
for Tape ............... to stop playback or recording.
SEARCH• TUNING
S
T
(à á)
for MP3-CD only…to select previous/next
album or track.
for CD/VCD .... to search backward/forward or
to skip to the previous/next
track.
for Tuner .............. to tune to a lower or higher radio
frequency or to search radio
stations.
for Tape ............... to rewind or fast forward.
for Clock ............to set the hour and minutes.
for Timer............. to set the timer function.
PRESET 4 3
PLAY•PAUSE 2Å
DIRECTIONÅ1 2Å
for CD/VCD/MP3-CD…to start or interrupt
playback (only 2Å is available).
for Tuner .............to select a preset radio station.
for Tape ............... to start playback in selected
direction or pause.
# # OPEN
– to open the tape deck door.
$ Tape compartment
% RECORD ¶
– to turn to record ready state (in CD/VCD or
Tuner mode only).
^ REPEAT•DEMO
for MP3-CD only…to repeat a track, an album
or whole disc.
for CD/VCD .... to repeat a disc track or the
whole disc.
for DEMO ......... to activate/deactivate the
demonstration.
& MIC
– to connect microphone.
* PROGRAM
for CD/VCD/MP3-CD…to programme disc
tracks.
for Tuner .............to programme preset radio
stations.
for Clock ............to set or reset clock.
for Timer............. to set or reset timer.
( iR SENSOR
– infrared sensor for remote control.
) TIMER ON/OFF / SET
– to activate/deactivate or set the timer.
¡ CLOCK
– to view the clock or set the clock
– to select the sleep time.
™ SLEEP
– to select the sleep time.
Controls (main system’s illustration on page 3)
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM10