21
English
point 2
Tape Operation/Recording
Microphone Mixing
Connect a microphone (not supplied) to the
system allowing you to sing along with the music
source.
1 Connect a microphone to the MIC jack.
● Before connecting the microphone, reduce
volume to prevent howling sound.
2 Select VCD and press 2Å to start playback.
3 Adjust the volume level of the source with
VOLUME control.
4 Press MIC/ECHO to adjust the MIC and
ECHO level to the desired mixing level.
5 Start singing or talking through the microphone.
Karaoke
MIC
Notes:
– Keep the microphone away from the speakers to
prevent howling.
– Microphone mixing only available in CD/VCD
mode.
Note:
– During recording, it is not possible to change
tape direction or listen to another source.
Recording timer
To record a radio station from a specified time,
you will need to use a preset radio station and
to set a start (ON) and finish (OFF) time.
1 Load a recordable tape into the tape deck.
➜ If desired, select tape reverse mode option.
2 Follow the “Timer setting” procedure as
described on page 22 to store the starting and
finishing time for recording. Select “REC TU” as
the wake up source for timer recording.
Note:
– If the system is switched on and the preset time
is reached, it is not possible to activate the
recording timer.
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM21