Filter
Top Products
20
English
point 2
Tape Operation/Recording
Loading a tape
1 Press # OPEN to open
the tape deck door.
2 Insert a recorded tape
and close the tape door.
● Load the tape with the
open side down.
Tape playback
1 Press TAPE to select Tape mode.
2 Press Å1 or 2Å to select the direction for
playback.
➜ "PLAY" with playback direction indicator will
appear on the display.
● To interrupt playback, press the last selected Å1
or 2Å button.
➜ "PAUSE" will be displayed.
● To resume playback, press Å1 or 2Å again.
3 To stop playback, press 9.
Auto Reverse
● Press REV. MODE (TAPE) repeatedly to
select the different playback modes.
å : playback on one side of the tape only.
∂ : both sides are played once.
∫ : both sides are played repeatedly, up
to 10 times each side unless you pressÇ.
CLOCK
TIMER
ON/OFF
SET
OPEN/
CLOSE
STEREO/
VOCAL
OSD/DIM
iR SENSOR
SHUFFLE REV.MODE
BAND
RECORD
PROGRAM
MIC
REPEAT• DEMO STOP•CLEAR SEARCH•TUNING
VOLUME
STANDBY
ON
MC
-
55 VIDEO CD MICRO SYSTEM
DIGITAL SOUND CONTROL
OPEN
DIGITAL SOUND
CONTROL
4 PRESET 3
DIRECTION PLAY•PAUSE
1
2
3
VCD
TUNER TAPE
Rewind/Fast forward
1 Press
S
or
T
to rewind or fast forward the
tape.
➜ "TAPE" with the direction indicator will
appear on the display.
2 Press Ç to stop rewinding or fast forwarding.
● The tape will stop automatically at the end of
the rewinding or fast forwarding.
General information on
recording
● Recording is permissible if copyright or other
rights of third parties are not infringed upon.
● If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
● For recording, use only tape of IEC type I
(normal tape).
● The recording level is set automatically,
regardless of the position of the Volume, DSC
and so forth.
● The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
● To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
● If “ERROR” or “TAPE PROTECTED” is displayed,
the protection tab has been broken. Put a piece
of clear adhesive tape over the opening.
Recording
1 Load a recordable tape into the tape deck.
2 Press VCD or TUNER to select the recording
source.
3 Press RECORD.
➜ “REC < >” will be displayed and REC starts
flashing.
4 Press REV. MODE (TAPE) repeatedly to
select a recording mode.
➜ å for recording on one side only.
➜
∂ ∂
∂ ∂
∂ for recording on both sides.
5 Press Å1 or 2Å to start and select the
direction for recording.
➜ REC will remain on the display.
● To stop recording, press Ç.
➜ The selected recording source will continue
playing.
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM20