Filter
Top Products
9
FWV135/98
English
Preparations
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
● Adjsut the FM antenna for optimal stereo
reception.
C Speakers Connection
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", red wire to "+" and black wire to "-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
–For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of
+
/
-
speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
D Video Out Connection
Using the supplied video cable, connect the
VIDEO OUT terminal at the rear of the
system to the TV or VCR VIDEO IN for viewing
or recording.
Optional connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TV, VCR, Laser Disc player, DVD player or
CD Recorder to the AUX IN terminals on the
system.
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX left terminal. Alternatively, you can use a
“single to double” cinch cable (the output sound
still remains mono).
Inserting batteries into the
Remote Control
Insert two batteries (type R06 or AA, not
supplied) into the remote control with the
correct polarity as indicated by the + and -
symbols inside the battery compartment.
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
pg001-pg025_FWV135_98-Eng 22/2/06, 12:079