Filter
Top Products
23
FWV135/98
English
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 In power-on mode, press SLEEP on the remote
control repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™
20 ™ 10 ™ OFF
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2 When you reach the desired length of time, stop
pressing the SLEEP button.
➜ “SLEEP” is displayed if activated.
Clock/Timer
To deactivate the sleep timer
● Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
➜ “SLEEP” disappears from the display.
Specifications
AMPLIFIER
Output power .......................................2 x 10 W RMS
......................................................................... 600 W PMPO
Signal-to-noise ratio....................................... ≥ 62 dBA
Frequency response .........63 – 16000 Hz, ± 3 dB
Impedance loudspeakers......................................... 6 Ω
DISC PLAYER
Number of programmable tracks ......................... 20
Frequency response .......................... 63 – 16000 Hz
Signal-to-noise ratio....................................... ≥ 62 dBA
Channel separation..........................≥ 25 dB (1 kHz)
Total harmonic distortion.................. < 3% (1 kHz)
MPEG 1 .................................................VCD version 2.0
MPEG 1 Layer 3 (MP3-CD) ..........MPEG AUDIO
MP3-CD bit rate ................................... 32 – 256 kbps
sampling frequencies ... 48 kHz, 44.1 kHz, 32 kHz
TUNER
FM wave range ...................................87.5 – 108 MHz
MW wave range................................522 – 1611 kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity ................................................................. ≥ 28 dB
Total harmonic distortion..................................... ≤ 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... ≥ 50 dBA
TAPE DECK
Frequency response
Normal tape (type I)......80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I).................................... 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) .193 x 286 x 246 (mm)
ws
GENERAL INFORMATION
AC Power.................................110–127 / 220–240 V;
~ 50/60 Hz Switchable
Dimensions (w x h x d) ... 267 x 298 x 254(mm)
Weight(with/without speakers) .........6.6 / 3.95 kg
Standby power consumption............................ <7W
Specifications and external appearance are
subject to change without notice.
pg001-pg025_FWV135_98-Eng 22/2/06, 12:0723