Filter
Top Products
22
FWV135/98
English
Clock/Timer
Clock setting
1 In standby mode, press briefly CLOCK•TIMER
(or press and hold CLOCK SET on the
remote).
➜ The display lights up, and the display digits
flash.
2 Press ALBUM-/+ 1/¡ ( or ALBUM 3/4
on the remote) to set the hours.
3 Press TITLE-/+ í/ë/ (or 4 / ¢ on the
remote ) to set the minutes.
4 Press CLOCK•TIMER (or CLOCK SET on
the remote) to confirm the time.
➜ The display lights off, and the set time is
displayed.
Wake-up timer setting
● The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time (one time operation). The clock time
needs to be set first before the timer can be
used.
● During setting, if no button is pressed within 20
seconds, the system will exit timer setting mode
automatically.
1 Set the clock time if not.
2 In standby mode, press and hold
CLOCK•TIMER (or TIMER on the remote)
until is displayed.
➜ The display lights up, and the display digits
flash.
● The display will show CD or TU, indicating you
are in CD or TUNER mode for wakeup. To select
between CD or TUNER mode for wakeup, press
DISC or TUNER/BAND (VCD/CD or
TUNER on the remote).
3 Press ALBUM-/+ 1/¡ ( or ALBUM 3/4
on the remote) to set the hours.
4 Press TITLE-/+ í/ë/ (or 4 / ¢ on the
remote ) to set the minutes.
5 Press CLOCK•TIMER (or TIMER on the
remote) to confirm the time.
➜ The display lights off, and the timer is now set
and activated.
➜ is displayed when activated.
To deactivate the wake-up timer
● Simply press STANDBY ON (y on the
remote) to switch on the system.
➜
disappears from the display, and the set
wake-up time will be erased.
Notes:
– If CD mode is set for wakeup and no disc is
loaded, then TUNER will be auto switched on at the
set wake-up time.
– At the set wake-up time for the tuner mode,
switching on of FM or MW will be decided by the
last selected waveband before the wakeup time is
set.
PAL/
NTSC
DBB
DSC
ALBUM ALBUM
ECHO
KEY PROG
pg001-pg025_FWV135_98-Eng 22/2/06, 12:0722