Filter
Top Products
12
FWV135/98
English
Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press 2 STANDBY-ON.
➜ The LCD display lights up. The system will
switch to the last selected source.
● Press VCD/CD, TUNER, TAPE or AUX on
the remote control (TUNER/BAND, DISC,
or TAPE/AUX on the system.)
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press 2 STANDBY-ON.
➜ The LCD display lights off. The set clock time
will be displayed. If the clock time is not set,
-- -- : -- -- is displayed (See Clock setting).
Adjusting volume and sound
1 Adjust the VOL control (or press
VOL –/+ on the remote) to decrease or
increase volume of the system.
➜ Display briefly shows VOL and a number
from 00 to 40 to indicate the volume level.
2 Press DSC repeatedly to select the desired
sound effect: ROCK/JAZZ/POP/CLASSIC.
➜ Display shows selected sound option.
3 Press DBB to switch bass enhancement on or
off.
➜ If activated, DBB is displayed.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
is displayed.
● To restore the volume, press MUTE again or
increase the volume level.
.
PAL/
NTSC
DBB
DSC
REPEAT SHUFFLE REPEAT
A-B
ZOOM
ALBUM ALBUM
DISPLAY
OSD
PBC RETURN DIGEST
GOTO RESUME SLOW AUDIO/ VOCAL
CLOCK SET TIMER SLEEP MUTE
VCD/CD TUNER TAPE AUX
ECHO
KEY PROG
pg001-pg025_FWV135_98-Eng 22/2/06, 12:0712