Philips FWV135 Stereo System User Manual


 
20
FWV135/98
English
Ta pe Operation/Recording
Ta pe playback
1 Select TAPE source.
The display shows “TAPE”.
2 Press STOP•OPEN to open the tape door.
3 Insert a recorded tape and close the tape door.
Load the tape with the open side downward and
the full spool to the left.
4 Press 2 to start playback.
To stop playback
Press STOP•OPEN.
Rewinding / Fast forwarding
1 Press REW S or F. FWD ¢ to fast
rewind or forward the tape.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2 Press STOP•OPEN to stop rewinding or fast
forwarding.
Note:
During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suitable for recording on
METAL (IEC IV) type tapes.
The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND or DBB will not affect the
recording in progress.
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.METAL (IEC IV) type tapes.
ALBUM ALBUM
VCD/CD TUNER TAPE AUX
ECHO
KEY PROG
pg001-pg025_FWV135_98-Eng 22/2/06, 12:0720