Filter
Top Products
15
FWV135/98
English
CD/VCD/MP3-CD Operation
Different play modes: SHUFFLE
and REPEAT
For CD/MP3
You can select and change the various play
modes before or during playback.
SHUFFLE.............tracks of the entire disc are
played in random order
SHUFFLE REP ALL........repeats the entire disc
continuously in random order
REPEAT ............plays the current track repeatedly
REPEAT ALL......repeats the entire disc/ program
1 To select your play mode, press the REPEAT or
SHUFFLE on the remote control before or
during playback until the display shows the
desired function. (SHUFFLE, REPEAT,
REPEAT ALL)
2 Press ÉÅ to start playback if in the STOP
position.
3 To return to normal playback, press REPEAT or
SHUFFLE until CANCEL is isplayed.
● You can also press STOP 9 to cancel your play
mode.
Notes:
– Shuffle play is not available for VCD.
– In the REPEAT or REPEAT ALL mode, selecting
SHUFFLE function will only repeat the entire disc in
random order.
– In the SHUFFLE mode, selecting REPEAT or
REPEAT ALL function will only repeat the entire disc
in random order.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
1 Load the desired disc on the disc tray.
2 Press the VCD/CD (DISC on the system)
button to select the source.
3 In the stop position, press PROG (PROGRAM
on the system) to start programming.
➜ On the system’s display, PROG appears, and
-01 is also displayed, indicating the first
program sequence available.
➜ On the TV screen, a program list pops up for
you to enter desired track/title numbers.
4 Press TITLE-/+ í/ë (4 / ¢, or Digits
0-9 on the remote control) repeatedly to select
the desired track.
● For MP3-CD, first select the desired album by
pressing ALBUM-/+ 1/¡ (ALBUM 3/4
,or Digits 0-9 on the remote control), then
press PROG to confirm and store the selected
album.
➜ AXX is displayed, indicating the selected
album number.
5 Press PROG (PROGRAM on the system) to
confirm and store.
➜ On the system’s display, -02 is displayed,
indicating the second program sequence
available.
➜ On the TV screen, the arrow will move to the
next program position.
● Repeat steps 3–5 to store other tracks.
6 PressÉÅ to start programme playback.
Note:
– If you attempt to programme more than 20
tracks, “MEMORY FULL” will be displayed on the TV
screen, and no more track can be stored.
Erasing the program
You can erase the program by:
● pressing STOP 9 twice during playback or once
in the stop position;
● opening the CD compartment;
● change to other source
➜ PROG will disappear on the display.
pg001-pg025_FWV135_98-Eng 22/2/06, 12:0715