Filter
Top Products
17
FWV135/98
English
Return
● Press RETURN to return to the previous VCD
disc MENU level. PBC mode must be switched
on to carry out this function.
Digest
This feature allows you to scan through a VCD
for a quick review.
In the stop mode
1 Press DIGEST on the remote control.
➜ Each track on the disc will be displayed in
thumbnail on the TV screen at 5-second interval.
2 Press digit 0 – 9 on the remote control to
select the desired track.
3 PressÉÅ to playback in a full screen.
Note:
– Some VCDs have a single track, so track
selecting will be ignored.
During playback
1 Press DIGEST on the remote control.
➜ The current track of the selected disc will be
divided into 9 parts and displayed on the TV
screen.
2 Press digit 0 – 9 on the remote control to
select the desired position.
3 PressÉÅ to playback from the selected
position in a full screen.
● To exit the DIGEST mode, you may also press
DIGEST on the remote, or 9 .
A-B Repeat
This feature is also applicable to audio CD
(except MP3-CD). To play a certain scene or
passage of the disc repeatedly:
1 Press REPEAT A- B on the remote control
during playback to mark the start of the chosen
scene or passage.
➜ REPEAT A appears on the TV screen.
2 Press REPEAT A- B again to mark the end of
the chosen scene or passage.
➜ REPEAT AB appears on the TV screen.
● The selected scene or passage is played
repeatedly.
3 Press REPEAT A- B once more to return to
normal playback.
➜ REPEAT AB CANCEL appears on the TV
screen.
● You may press 9 to exit the REPEAT A- B mode.
GOTO
1 Press GOTO on the remoto control.
➜ “GOTO--: --” appears on the TV screen.
2 Press digit 0– 9 on the remoto control to key
in the disc time from which you want the disc to
begin.
Notes:
–For the VCD with PBC feature (2.0 version),
switch off PBC before selecting GOTO.
–GOTO function is also applicable to audio CD.
Resume
● In the stop mode, press RESUME on the
remote control to start playback again from
where you have stopped.
Notes:
– The resume information is lost if the disc tray is
opened, the source is changed or the system is
disconnected from the power supply.
–For VCD, it may take more than 20 seconds to
resume playback due to the large number or size
of tracks.
ZOOM
1 Press ZOOM repeatedly to select zoom
number (2 or 4) to enlarge TV screen picture.
➜ The selected zoom number will be displayed
briefly on the TV screen.
● To return to the normal picture, press ZOOM
repeatedly until “RESTORE” is displayed.
Slow
1 Press SLOW on the remote control to watch a
VCD at a slower speed. There are 4 types of
slow modes to select.
➜ The sound is muted.
➜ On TV screen, “SLOW 1/2”, “SLOW 1/4”,
“SLOW 1/8”, “SLOW 1/16” or “PLAY” is
displayed.
2 To resume playback at normal speed, pressÉÅ.
VIDEO CD
pg001-pg025_FWV135_98-Eng 22/2/06, 12:0717