Filter
Top Products
8
FWV135/98
English
Preparations
Rear connections
The type plate is located at the rear of the
system.
A Power
Before connecting the AC power cord to the
wall outlet, ensure that the following are done;
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR
to the local power line voltage.
– All other connections have been
made.
WARNING!
–For optimal performance, use only the
original power cable.
–Never make or change any connections
with the power switched on.
B Antennas Connection
AM (MW) antenna
1 Unfold the loop antenna and if necessary, use
screws (not supplied) to fix it to a flat, hard
and stable place as shown below.
2 Fit the plug of the loop antenna to AM
ANTENNA as shown below.
3 Adjust the antenna for optimal reception
as far as possible from a TV, VCR or radiation
sources.
or
1
2
AM loop antenna
AC power cord
FM wire antenna
Speaker
(right)
Speaker
(left)
VIDEO OUT
IN
Television
L
R
IN
Cr
Cb
Y
A
B
C
D
pg001-pg025_FWV135_98-Eng 22/2/06, 12:078