![](http://pdfasset.owneriq.net/7/bb/7bbad623-a0a1-4534-9874-7c958ca9a772/7bbad623-a0a1-4534-9874-7c958ca9a772-bg8f.png)
Network settings
14
7 Click [Internet Protocol (TCP/IP)] and then click
[Properties].
This will display the [Internet Protocol (TCP/IP) Properties]
window.
8 Click [Use the following IP address] and then configure
the IP address and subnet mask.
• For the IP address, set the same subnet mask area as the
recorder.
• Depending on the network configuration, the default
gateway setting is required. For details about settings,
refer to your network administrator.
9 Click the [OK] button to close the window.