Filter
Top Products
25
To record at normal speed,
press
HIGH SPEED DUBBING
until the HIGH SPEED
DUBBING indicator turns off.
5. To stop copying, press
STOP/
EJECT
on both decks.
When the tape in either deck reaches
the end, that deck automatically
turns off. If the cassette in the other
deck has not run out of tape, that
tape continues to record or play. If
you use high-speed dubbing, the
tape continues to play/record at nor-
mal speed (instead of high speed).
Copying a CD to a Cassette
Tape
Follow these steps to copy tracks
from the loaded CDs to a cassette
tape in TAPE 1.
1. Load a blank cassette tape, or
one you want to record over, into
TAPE 1.
2. Press
PAUSE
then
RECORD
.
3. Press
CD PLAY/PAUSE
to select
the CD player.
4. Load the desired CDs in the CD
player.
5. Set
RANDOM
or
REPEAT
or store
a programmed sequence, if
desired.
6. Press
PAUSE
on TAPE 1 to
release it, then
CD PLAY/PAUSE
to start the CD player. The sys-
tem records from the CD onto
the cassette tape.
7. To stop recording before the end
of the tape or CD, press
STOP/
EJECT
on TAPE 1
,
then
press
STOP
on the CD player.
CD Synchro Dubbing
You can start the CD and recording
at the same time (synchronously).
Follow the steps in “Loading a CD”
and “Playing a CD” on Page 16 to
load a CD and to select the desired
CD and track number.
1. Load a blank tape, or one you
want to record over, into TAPE
1.
2. Press
CD PLAY/PAUSE
twice.
appears.
3. Press
RECORD
on
TAPE 1.
PLAY
automatically locks down,
the CD player starts playing, and
recording begins.
4. Press
STOP/EJECT
on TAPE 1
to stop recording.
5. Press
STOP
to stop the CD.
y
13-1289.fm Page 25 Wednesday, July 14, 1999 6:09 PM