Filter
Top Products
20
To repeat a programmed sequence
(see “Programmed Play”), press
REPEAT
while the programmed se-
quence is playing.
REPEAT
appears,
and the CD player continuously
replays the programmed sequence.
To cancel repeat play at any time,
repeatedly press
REPEAT
until
REPEAT
disappears from the dis-
play.
PROGRAMMED PLAY
You can program up to 32 tracks
from any loaded CDs to play in any
order you choose.
Programming and Playing a
Sequence of Tracks
1. Press
STOP
to cancel any CD
function.
2. Press
PROGRAM
. The display
shows
PROGRAM
-
-
-
P-01
(the first empty position in the
programmed sequence).
3. Select the CD containing the
tracks you want to store.
4. Press
SKIP/TUNING
⁄
or
Ÿ
on
the system (or
SKIP/TUNING
Down
on the remote control) to
select the track you want to
store.
5. Press
ENTER
. The track is
stored and the display shows
PROGRAM
-
-
-
P-02
.
6. Repeat Steps 3–5 to program
additional tracks.
Note:
FULL
appears on the dis-
play after you store the 32nd
track.
7. Press
CD PLAY/PAUSE
. The CD
player plays the tracks in the
programmed order.
PROGRAM
,
the current disc and track num-
ber, and the track’s elapsed time
appear on the display.
8. To stop playing a programmed
sequence, press
STOP
.
Notes:
• During play, you can press
SKIP/
TUNING
⁄
or
Ÿ
on the system
(or
SKIP/TUNING Down
or
Up
on the remote control) to
select a programmed track.
• Pressing
DISC/SKIP
has no
effect while a programmed
sequence plays.
13-1289.fm Page 20 Wednesday, July 14, 1999 6:09 PM