Filter
Top Products
22
USING THE CASSETTE DECK
You can use the system’s two cas-
sette decks for normal playback,
consecutive play, and recording.
Both decks have a full-release auto-
stop system to protect tapes and
prevent pinch roller damage. When a
tape reaches the end while playing or
recording, it automatically stops and
the tape-handling parts automatically
release.
To use a cassette deck, use the con-
trol buttons under the deck where the
tape is loaded.
LOADING A CASSETTE
TAPE
Follow these steps to load a cassette
tape in either TAPE 1 or TAPE 2.
1. Before loading a cassette tape,
take up any slack in the tape by
turning one of the cassette’s
hubs with a pencil. If you do not
remove excess slack, the tape
might become tangled in the
record/playback mechanism.
2. Press
TAPE
.
TAPE
appears.
3. Press
STOP/EJECT
to open the
cassette compartment door.
4. Load the cassette by placing it in
the tape guides in the cassette
compartment door, with its open
edge down, the desired side fac-
ing out, and its full reel to the
left.
5. Gently close the compartment
door.
.
13-1289.fm Page 22 Wednesday, July 14, 1999 6:09 PM