Optimus 742 Stereo System User Manual


 
12
Note: Press and hold down
SKIP/TUNING
or
Ÿ
(or
SKIP/
TUNING Down
or
Up
on
the remote control) to rapidly
advance the minutes.
5. Press
ENTER
or wait 10 sec-
onds. The minute digits stop
flashing and the time is set.
Note: In the event of a power failure,
the display will flash and the clock
must be reset.
BASIC OPERATION
1. Press
TUNER/BAND, TAPE
, or
CD PLAY/PAUSE
to select the
desired audio source.
2. If you select
TUNER/BAND
,
select the desired station (see
“Using the Tuner” on Page 14).
If you select
CD PLAY/PAUSE
or
TAPE,
start the selected audio
source (see “Using the CD
Changer” on Page 16 or “Using
the Cassette Deck” on Page 22).
3. Adjust
VOLUME
to a comfortable
listening level.
4. Adjust
BALANCE
until you can
hear the sound equally from the
left and right speakers.
5. Press
E-BASS
to emphasize
bass sounds. The E-BASS
indicator lights. To return to nor-
mal bass sounds, press
E-BASS
again. The E-BASS indicator
turns off.
6. To turn off the system, press
POWER
. The STAND BY indica-
tor lights.
13-1289.fm Page 12 Wednesday, July 14, 1999 6:09 PM