Filter
Top Products
47
Connecting -compatible AV Components
The terminal on the TX-NR1000/TX-NR5000E is
for connecting other Onkyo components equipped with
the same
terminal. When a component is connected
to the
terminal, it can be operated by the remote
controller supplied with the TX-NR1000/TX-NR5000E.
In addition, when you connect a component to the
terminal, you can also perform the system operations
given below.
Power on/ready function
When the TX-NR1000/TX-NR5000E is in the standby
state, if an
-connected component is turned on, the
TX-NR1000/TX-NR5000E also turns on and the input
source selected at the TX-NR1000/TX-NR5000E
automatically switches to that component.
Be aware that this function will not work if the power cord
for the
-connected component is connected to the AC
OUTLET on the TX-NR1000/TX-NR5000E, or if the
TX-NR1000/TX-NR5000E has already been turned on.
Direct change function
When the play button is pressed on an
-connected
component, the input source selected at the
TX-NR1000/TX-NR5000E automatically changes to
that component.
Power off function
When the TX-NR1000/TX-NR5000E is placed in the
standby state, all
-connected components are also
automatically put into the standby state.
Also, if you press the [ON] button on the TX-NR1000/
TX-NR5000E remote controller while the TX-NR1000/
TX-NR5000E is turned on, all
-connected
components (DVD players, CD players, MD recorders,
tuners, etc.) are also turned on.
To connect components using the
terminal, simply
connect a remote control cable from this
terminal to
the
terminal of the other component. An remote
control cable with a 1/8 inch (3.5 mm) miniature two-
conductor plug comes with every cassette tape deck,
compact disc player, MD recorder, and DVD player that
has an
terminal.
• When performing operations with
-connected
components using the
system, do not use the
remote zone (Zone 2/Zone3).
• For remote control operation, the audio connection
cables must also be connected.
• If a component has two
terminals, you can use
either one to connect to the TX-NR1000/
TX-NR5000E. The other one can be used to daisy
chain with another component.
• With Onkyo DVD players, you can enter the pre-
program code so that you can operate the DVD player
directly with the remote controller without connecting
the
terminals (See page 129).
REMOTE
CONTROL
MAIN
ZONE
3
ZONE
2
OUT
IN
AC
INLET
FRONT
L
CENTERFRONT
R
SURR BACK
R
(
ASSIGNABLE
)
SURR BACK
L
(
ASSIGNABLE
)
SURR
R
SURR
L
FRONT
R
(
BTL
)
FRONT
L
(
BTL
)
IR
12V
TRIGGER
OUT
RS
232
C D F
G
H I J K L
(
SINGLE
)
A
C
B
D
E
200mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
AC 120V 60Hz
SWITCHED
120W 1A MAX.
AC
OUTLET
UDC/ UDT
MODEL NO.
TX
-
NR
1000
SPEAKERS A
SPEAKERS B
22
11
66
55
44
33
22
11
C D
DIGITAL IN DIGITAL IN
OPTICAL COAXIAL
OUT
SBR SBL
SR SL
SUB C
FR FL
SBR SBL
SR SL
SUB C
FR
FL
E
MULTI
-
CH
IN
1
MULTI
-
CH
IN
2
AUDIO IN
1
3
2
1
PH
2
3
9
8
7
6
5
4
4
5
LRRL
OUT
LR
LR
R L
F
G
L
IN
1
IN
2
HDMI, the HDMI logo
is a trademark
or registered
trademarks of HDMI
Licensing LLC.
OUT
HDMI
S
VIDEO VIDEO
IN IN
IN
1
IN
2
3
2
1
Y
P
B
P
R
COMPONENT
VIDEO
IN
3
IH
6
5
4
Y
P
B
P
R
2
1
4
3
S VIDEOS VIDEO VIDEOVIDEO
OUT OUT
OUT
1
J
Y
P
B
P
R
Y
P
B
P
R
COMPONENT VIDEO
IN
4
OUT
2
K
ANTENNA
FM
75
AM
GND
REMOTE
CONTROL
L
R
ANALOG
OUTPUT
AUDIO IN
R
4
L
REMOTE
CONTROL
Onkyo DVD player
Remote
control
cable
Connections for Remote Control ( )
REMOTE
CONTROL
TX-NR1000/
TX-NR5000E
Ex: Onkyo CD player
connector
connector
Ex: Onkyo cassette tape
deck
Remote control cable