Filter
Top Products
38
Connecting AV Components
—Continued
• When connecting a CD player to the TX-NR1000/TX-NR5000E, make connections using digital or analog termi-
nals. Before making connections, refer to page 30 for correct connections. This section shows the connection exam-
ple when you use the default audio input assignment settings. However, when you use coaxial cables for digital
audio signals, connect the CD player to any terminal between the AUDIO IN DIGITAL COAXIAL 1 and 6, and
remember to configure the audio input assignment settings in the Audio Assign sub-menu (See page 94).
• When connecting a turntable, use the PH terminal. The PH terminal on the TX-NR1000/TX-NR5000E is designed
for turntables that use a moving magnet (MM) cartridge. When you want to use a turntable with a moving coil (MC)
cartridge, connect the turntable through a step-up transformer or head amplifier.
• If you assign other terminals to the PHONO input source, you need to configure the audio input assignment settings
in the Audio Assign sub-menu (See page 94).
• When a turntable is equipped with a ground wire, connect the wire to the GND terminal on the TX-NR1000/
TX-NR5000E. However, some turntables may produce noise when the ground wire is connected to the TX-NR1000/
TX-NR5000E. In such a case, you do not have to connect the ground wire.
• When you want to perform analog recording of the audio signal or operate your -compatible Onkyo products via
connections between the TX-NR1000/TX-NR5000E, you have to make analog audio signal connections. Con-
nect the audio output terminals on the source device to the AUDIO IN terminals on the TX-NR1000/TX-NR5000E
using analog audio cables (RCA/phono).
Connecting a Portable DVD Player or Video Camcorder
Connecting a CD Player, Turntable or Tuner
OPTICAL S VIDEO
VIDEO
L----AUDIO----R
VIDEO 7 INPUT
VIDEO
OUT
R
L
ANALOG
S VIDEO
OUT
DIGITAL
OPTICAL
AUDIO OUT
AUDIO OUT
• When connecting a portable DVD player or video
camcorder to the TX-NR1000/TX-NR5000E, use the
VIDEO 7 INPUT terminals on the front panel.
• You can change the display name for the input source
to represent the actual connected device (See page
97).
Game, Portable DVD,
Video Camcorder
GND
“Net
-
Tune”
is
a
trademark
of
Onkyo
Corporation.
44
33
2 2
11
C D
DIGITAL IN DIGITAL IN
OPTICAL COAXIAL
FR FL
SBR SBL
SR SL
SUB C
FR
FL
E
MULTI
-
CH
IN
1
AUDIO IN
2
1
PH
7
6
5
4
LR RL
LR
F
G
L
HD
is
or
tra
Lic
S
VIDEO VIDEO
IN
1
IN
2
3
2
1
Y
P
B
PR
COMPONENT
VIDEO
IN
3
I
4
Y
OUT
1
J
Y
P
B
PR
COMPONENT VIDEO
IN
4
OUT
2
K
ANTENNA
FM
75
G
H
R
L
ANALOG
DIGITAL
OPTICAL
AUDIO OUT AUDIO OUT
GNDGND
When connecting to other audio terminals within the
same terminal section, configure the audio input set-
tings accordingly using the Audio Assign sub-menu
(See page 94).
CD Player
Turntable