Filter
Top Products
120
i.LINK Setup
This menu can be used when connecting to an Onkyo i.LINK (AUDIO)-ready device.
a. Wakeup on i.LINK (IEEE1394)
Specify connecting condition on standby of the
TX-NR1000/TX-NR5000E.
Enable: To be left connected.
Disable (Default): To be disconnected while the
TX-NR1000/TX-NR5000E is on standby to save
electricity.
a. OSD for DVD
Even when a DVD player is directly connected to the
TV, the OSD screen of the TX-NR1000/TX-NR5000E
can be displayed on the TV monitor if the DVD player
is an Onkyo i.LINK (AUDIO)-ready device. In this
case, use the i.LINK cable to connect the i.LINK
(AUDIO) terminal on the TX-NR1000/TX-NR5000E
and i.LINK (AUDIO) terminal on the DVD player.
Disable (Default): Select this to block OSD screen
display.
Left: Select this to display the OSD screen on the left
side of the TV monitor.
Right: Select this to display the OSD screen on the
right side of the TV monitor.
b. Select DVD
Select the name of the device that should display the
OSD screen using the [ ]/[ ] cursor buttons if
multiple Onkyo i.LINK (AUDIO)-ready devices are
connected to the TX-NR1000/TX-NR5000E. This item
does not appear when “Disable” is selected in the OSD
for DVD setting.
When listening in Zone 2, the same setting as above is
available.
a. i.LINK Selector Change
This menu allows you to enable/disable the i.LINK
Selector Change function. When an i.LINK (AUDIO)-
enable device is used to playback, this function switches
the input source to the one assigned to the device.
Enable: Enables the i.LINK Selector Change function.
Disable (Default): Disables the i.LINK Selector
Change function.
b. DVD Output for Zone 2
This option automatically switches the i.LINK Audio
Output of Onkyo’s DVD players. With this function
enabled, audio signals of SACD will be output through
i.LINK when no source is selected for Zone 2, or it will
be output in analog format when any source is selected
for Zone 2.
Enable: Enables the DVD Output for Zone 2 function.
Disable (Default): Disables the DVD Output for Zone
2 function.
Wakeup Setup
OSD for DVD
OSD for DVD (Zone 2)
System Control Setup