Filter
Top Products
29
Though the TX-SR800 is often used to listen to the radio, it does not
show you its true ability until it is used to play music or watch
videos, DVDs, and the like. The TX-SR800 has the latest and most
state-of-the-art features to play back today’s technologies with the
utmost in fidelity and power. From a two-speaker system to a seven-
speaker system, you are assured a sound space that you can always
enjoy.
To ensure the proper sound space, you must first perform the
speaker setup settings. These settings allow you to set the type of
speakers you are using, the distance that they are located from
the listening position, and the individual speaker volumes. For
more details, see Speaker Setup Sub-menu of the Setup Menu on
page 43.
Basic operation
If you want to perform these operations using the remote controller,
first press the RCVR button.
1. Press the input source button (or INPUT SELECTOR
button on the remote controller) that corresponds to
the source to which you want to listen.
2. Turn on the corresponding component and play the
media.
STANDBY/ON
STANDBY
PHONES
MASTER VOLUME
TAPE TUNER PHONO C
D
VIDEO
4
VIDEO
5
VIDEO
3
VIDEO
2
VIDEO
1
DVD
OFFZONE
2
REC OUTDISPLAY DIMMER
AUDIO
SELECTOR
ZONE
2
()
GRN
REC
()
RED
VCR
2
VCR
1
S VIDEO AUDIO
VIDEO L R
DIGITAL
VIDEO
5
INPUT
OFF
ON
POWER
TX
-
SR800
PURE AUDIO
UPSAMPLING
CLEAR
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIOSTEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNI NG
PRESET
MASTER VOLUME
VOL /
RCVR
TAPE
Enjoying music or videos with the TX-SR800
INPUT
SELECTOR
buttons
Input source buttons
TX-SR800
Remote controller
TX-SR800 Remote controller
3. Adjust the volume.
Adjusting the main volume adjusts the volume level of all the
speakers connected to the TX-SR800 together. If headphones
are connected, this also adjusts the volume heard from the
headphone speakers. To adjust the volume, either press the VOL
buttons on the remote controller or turn the MASTER
VOLUME dial. To increase the volume, turn the dial clockwise;
to decrease the volume, turn the dial counterclockwise. The
volume can be set to 0 to 100 (or –∞, –81 to +18 dB).
To change the display of the input source from
TAPE to MD
If you connected an MD recorder to the TAPE jack on the TX-
SR800, you can have “MD” appear when the TAPE source button is
pressed.
Changing the display:
Press and hold down the TAPE source button until the display
changes from TAPE to MD (approx. 3 seconds).
To return the display to its original setting, perform the same
procedure.
TAPE TUNER PHONO C
D
VIDEO
4
VIDEO
5
VIDEO
3
VIDEO
2
VIDEO
1
DVD
VCR
2
VCR
1
MASTER VOLUME
TAPE