Filter
Top Products
65
Advanced Setup
—Continued
A/V Sync
When using your DVD player’s progressive
scanning function, you may find that the pic-
ture and sound are out of sync. With the A/V
Sync setting, you can correct this by applying
a delay to the audio signal. The delay can be
set from 0 to 100 milliseconds (msec) in 10
millisecond steps.
Use the Left and Right [ ]/[ ] buttons to
set the delay.
To view the TV picture while setting the
delay, press [ENTER].
If HDMI Lip Sync is enabled (see page 68),
and your TV or display supports HDMI Lip
Sync, the displayed delay time will be the
A/V Sync delay time. The HDMI Lip Sync
delay time is displayed underneath in paren-
theses.
Note:
• A/V Sync is disabled when the Direct lis-
tening mode is used with an analog input
source.
Music Optimizer
The Music Optimizer function enhances the
sound quality of compressed music files. Use
it with music files that use “lossy” compres-
sion, such as MP3.
Off:
Music Optimizer off (default).
On:
Music Optimizer on.
Note:
• The Music Optimizer function only works
with PCM digital audio input signals with a
sampling rate below 48 kHz and analog
audio input signals. The Music Optimizer
is disabled when the Direct listening mode
is selected.
Name Edit
You can enter a custom name of up to 10
characters for each input selector. When an
input selector with a custom name is selected,
the custom name will be displayed instead of
the default name.
1
Select the input selector to
which you want to give a cus-
tom name.
2
Press the [SETUP] button.
3
Use the Up and Down [ ]/[ ]
buttons to select “4. Source
Setup,” and then press
[ENTER].
4
Use the Up and Down [ ]/[ ]
buttons to select “Name Edit,”
and then press [ENTER].
5
Use the Up and Down [ ]/[ ]
buttons to select a character,
and then press [ENTER].
The character is set and the cur-
sor moves one place to the right.