22
Connecting AV Components
—Continued
You can connect components with digital audio outputs to the HTX-22HD’s COAXIAL IN,
OPTICAL IN 1, and IN 2 inputs. Choose a digital input (coaxial or optical) that matches the
digital audio output on your source component. To enjoy Dolby Digital and DTS, you must
connect your DVD player with an optical or coaxial digital audio cable. If your DVD player
supports HDMI, you can use an HDMI connection instead (see page 24).
Notes:
• After you connect a component to an input jack, you must assign that input jack to an input
selector. See “Audio Input Setup” on page 36.
• On some source components, Dolby Digital and DTS output may be turned off by default, in
which case you’ll need to turn it on.
• If one of your source components is noticeably louder or quieter than your others, use the
IntelliVolume function to adjust its input level (see page 64).
Connecting Components with Digital Outputs
CD player, etc.
DVD player,
Set-top box, etc.
Games console,
TV, Computer, etc.
Coaxial digital audio cable
(not supplied)
Optical digital audio cable
(supplied)