Filter
Top Products
54
Using the Listening Modes
—Continued
T-D (Theater-Dimensional)
■
LstnAngl (Listening Angle)
With this setting, you can optimize the The-
ater-Dimensional listening mode by specify-
ing the angle of the front left and right
speakers relative to your listening position.
Ideally, the front left and right speakers
should be equidistant from your listening
position and at an angle close to one of the
two available settings.
Narrow:
Select if the listening angle is 20
degrees.
Middle:
Select if the listening angle is 30
degrees.
Wide:
Select if the listening angle is 40
degrees (default).
■
Front 5.1ch
With this setting, you can specify how your
five surround speakers (front L/R, center, and
surround L/R) are arranged to get the best
effect from the Theater-Dimensional listening
mode.
Yes:
Select this if you’ve arranged your
five speakers so that they are all at the
front.
No:
Select this if you’re using the normal
arrangement for five surround sound
speakers.
Note:
• This setting is available only when the
Speaker Configuration is set to 5.1ch (see
page 56).
Dynamic EQ
■
Dynamic EQ
With Dynamic EQ, you can enjoy great sound
even when listening at low volume levels.
Dynamic EQ solves the problem of deterio-
rating sound quality as volume is decreased
by taking into account human perception and
room acoustics.
It does so by selecting the correct frequency
response and surround volume levels
moment-by-moment so that the content
sounds the way it was created at any volume
level—not just at reference level.
Off:
Dynamic EQ off.
On:
Dynamic EQ on.
Note:
• Dynamic EQ can be set only when the
Equalizer Settings on page 62 are set to
Audyssey.
20˚/40˚
Front left
speaker
Front right
speaker