Onkyo HTX-22HD Speaker System User Manual


 
31
Turning On the HTX-22HD
—Continued
Turning On and Standby
On the HTX-22HD, press the [ON/STANDBY] button.
On the remote controller, press the [ON/STANDBY] button.
The HTX-22HD comes on, the display lights up, and the
STANDBY indicator goes off.
To turn off the HTX-22HD, press the [ON/STANDBY] button,
or press the remote controller’s [ON/STANDBY] button. The
HTX-22HD will enter Standby mode. To prevent any loud sur-
prises the next time you turn on the HTX-22HD, turn down the
volume before you turn it off.
ON/STANDBY
ON/STANDBY
STANDBY indicator
Remote
controller
HTX-22HD
or
What’s Next?
If you’re using the HTX-22HD for the very first time, here’s a few settings that you need to
make. These settings only need to be made once.
Do the automatic speaker setup—this is essential!
See “Automatic Speaker Setup (Audyssey 2EQ)” on page 32.
Assign input jacks to input selectors
See “Audio Input Setup” on page 36.
Did you connect any HDMI components?
If you did, see “HDMI Input Setup” on page 37.
Did you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock
to the LINE 1 or LINE 2 input?
If you did, see “Audio Input Setup” on page 36 and “Changing the Input Display” on
page 38.