Filter
Top Products
64
Advanced Setup
—Continued
This section explains items on the Source
Setup menu. Items can be set individually for
each input selector.
IntelliVolume
With IntelliVolume, you can set the input
level for each input selector individually. This
is useful if one of your source components is
louder or quieter than the others.
Use the Left and Right [ ]/[ ] buttons to
set the level.
If a component is noticeably louder than the
others, use the Left [ ] button to reduce its
input level. If it’s noticeably quieter, use the
Right [ ] button to increase its input level.
The input level can be adjusted from –12 dB
to +12 dB in 1 dB steps.
Source Setup
1
Press the input selector but-
tons to select an input source,
and then press the [SETUP]
button.
2
Use the Up and Down [ ]/[ ]
buttons to select “4. Source
Setup,” and then press
[ENTER].
ENTER
SETUP
INPUT
SELECTOR
3
Use the Up and Down [ ]/[ ]
buttons to select an item, and
then press [ENTER].
4
Use the Left and Right [ ]/[ ]
buttons to change it.
The Source Setup menu items
are explained below.
5
When you’ve finished, press
the [SETUP] button.
Setup closes.