Filter
Top Products
63
Advanced Setup
Speaker Distance
Here you can specify the distance from each speaker to
the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.
Notes:
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between
15 and 25 ft. (4.5 and 7.5 m). The Surr Right and Surr
Left distances can be set up to 5 ft. (1.5 m) more or
15 ft. (4.5 m) less than the Front distance. For exam-
ple, if the Front distance is set to 20 ft. (6 m), the Surr
Right and Surr Left distances can be set between 5 and
25 ft. (1.5 and 7.5 m).
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Advanced Speaker Settings
1
Press the [RECEIVER] or [AMP]
button followed by the [SETUP]
button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker Dis-
tance,” and then press [ENTER].
The Speaker Distance menu appears.
Note:
Speakers that you set to No or None on
the Speaker Configuration page
(page 42) cannot be selected.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUPRETURN
PLAYLIST/CAT PLAYLIST/CAT
--
/
---
TAPE/AMP
M
D/CDR
HDD
CABLE
STANDBY/ON
DIMMER
ENT
D TUN
SLEEP
10 11 12
INPUT SELECTOR
REMOTE MODE
V1
V4
V2 V3
C
DTAPE TUNER
DVD
MULTI CH
TV
VOL
VOL
SAT
VCR
TV
DVD
RECEIVER
C
D
INPUT
+
10
0
CLR
123
456
789
ENTER
CH
DISC
ALBUM
1, 6
2-4
2
1
RECEIVER
AMP
SETUP
2.Speaker Distance
------------------------
a.Unit :meters
b.Front : 3.6m
c.Center : 3.6m
d.SurrRight : 2.1m
e.SurrLeft : 2.1m
f.Subwoofer : 3.6m
3
Use the Up and Down [ ]/[ ]
buttons to select “a. Unit,” and
then use the Left and Right [ ]/
[ ] buttons to select:
feet: Select if you want to enter
distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
4
Use the Up and Down [ ]/[ ]
buttons to select “b. Front,” and
then use the Left and Right [ ]/
[ ] buttons to specify the dis-
tance.
Specify the distance from the front left
speaker to your listening position.
5
Repeat step 4 for all speakers.
6
Press the [SETUP] button.
The setup menu closes.
SETUP