Onkyo HT-R640 Stereo Receiver User Manual


 
58
Using the Listening Modes—Continued
The following table shows which listening modes can be used with each input signal format.
Source format
Listening mode
Analog,
PCM
*1
1. In the Pure Audio and Direct listening modes, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In
listening modes other than Pure Audio, Direct, and Stereo, 64 kHz, 88.2 kHz, and 96 kHz PCM is processed at 32 kHz, 44.1 kHz, and 48 kHz
respectively. For PCM 176.4/192 kHz signals input through HDMI IN, only Pure Audio, Direct, and Stereo listening modes can be selected.
Dolby Digital
DTS/DTS 96/24
*2
2. In listening modes other than Pure Audio, Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.
Multich
analog,
Multich
PCM
3/2.1
2/2.1
2/0 1/0, 1+1 Other
3/2.1
2/2.1
2/0 Other
CD, TV,
radio,
cassette,
etc.
DVD, DTV, etc. DVD, CD, etc. DVD
Pure Audio (not North
American models)
Direct
✔✔✔✔✔✔
Stereo
✔✔✔✔✔✔
Mono
✔✔✔✔✔✔
Multich
PLII Movie/Music/Game
Neo:6 Cinema/Music
✔✔
Neural Surround (North
American models only)
*3
3. Not available for 88.2 kHz and 96 kHz PCM input signals.
4. Available only when surround speakers are connected.
Dolby D
✔✔
DTS, DTS 96/24
✔✔
T-D
✔✔✔✔✔✔
Onkyo
Original
DSP
Mono Movie
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
Full Mono
✔✔✔✔✔✔
*4
Tip: To check the format of the digital input signal, see Displaying Source Information on page 46.