Filter
Top Products
31
Entering names
Entering track names
1 Turn the MULTI JOG dial to select the
desired track.
During playback, pause, or recording, the track
selected currently will be named.
PUSH TO
ENTER
MULTI JOG
5 Press the YES button to end name
input.
Or, press the NAME button on the remote
controller (RC-448C).
YES
DX-R700 RC-448C
NAME
DUAL
DIGITAL
INPUT
ANDBYST
OFF
ON
STANDBY/ON
POWER
AUDIO
CD
RECORDER
DX
-
R
700
MEMORY CLEAR
REPEAT FINALIZE
STOP PLAYPAUSE
REC
PHONES LEVEL
MIN MAX
PHONES
YES
INPUTDISPLAY
EDIT/
NO
PUSH TO
ENTER
MULTI JOG
STANDBY/
ON OPEN
/
CLOSE
RANDOMMEMORY REPEAT
NAMEABC DEF
231
SCROLL
GHI MNOJ
K
L
456
CLEAR
DISPLAY
ENTER
PQRS TUV W
XYZ
10
/
0
>
10
789
REC
q MULTI JOG w
YES
EDIT/NO
NAME
To write the entered names to the disc
Finalize the disc (see page 33).
The names you enter are temporarily stored in the
DX-R700 and then written to the disc during
finalization. Be aware of the following notes when
finalizing a disc.
Notes:
• The name information for the disc is left in the
DX-R700 if you have ejected the disc without
finalizing it. In this case, even if you insert a new
disc and attempt to enter names for it, “Erase
Name” will appear and the attempt will fail. To
solve this, erase the retained names (see page
32) or insert the previous disc, finalize it, and
then replace it with the new disc.
• You cannot finalize the disc if it has no disc
name.
• If you enter names for a blank disc and eject it
without recording, the name information will
not be retained in the DX-R700.
• You cannot enter names for the disc during auto
finalization.
2 Press the EDIT/NO button and turn the
MULTI JOG dial until “ Name In?”
appears.
Or, press the remote controller NAME button.
Pressing the NAME button proceeds to the state
after step 3 is complete (go to step 4).
EDIT/
NO
PUSH TO
ENTER
MULTI JOG
DX-R700 RC-448C
NAME