Filter
Top Products
16
Turning on the power
1 Press the POWER switch.
The recorder returns to the same state as you
pressed the POWER switch last time. When you
turn the main power on first time, the standby
indicator lights and the DX-R700 enters the
standby state.
If you turn off the main power last time with the
DX-R700 turned on, without pressing the
STANDBY/ON button the recorder will be
automatically turned on after pressing the
POWER switch next time. In this case, if the CD
is already loaded, the DX-R700 will automatically
start playback.
Connecting the power cord
Before you plug in the DX-R700, confirm that all the other connections have been made properly.
Turning the power on
When a malfunction occurs
The DX-R700 employs a microcomputer to realize its
advanced features. Although quite rare, occasionally
noise from outside the unit, interruption noise, or
static electricity may cause a malfunction. If a
malfunction occurs, unplug the power cord and
after about 5 seconds plug it in again.
Note:
The DX-R700 is shipped with the main power
(POWER) switch in the on position. When the power
cord is plugged in for the first time, the DX-R700 will
automatically enter the standby state and the
standby indicator will light (same condition after step
1 on the left).
DUAL
DIGITAL
INPUT
ANDBYST
OFF
ON
STANDBY/ON
POWER
AUDIO
CD
RECORDER
DX
-
R
700
MEMORY CLEAR
REPEAT FINALIZE
STOP PLAYPAUSE
REC
PHONES LEVEL
MIN MAX
PHONES
YES
INPUTDISPLAY
EDIT/
NO
PUSH TO
ENTER
MULTI JOG
STANDBY/
ON OPEN
/
CLOSE
RANDOMMEMORY REPEAT
NAMEABC DEF
231
SCROLL
GHI MNOJ
K
L
456
CLEAR
DISPLAY
ENTER
PQRS TUV W
XYZ
10
/
0
>
10
789
REC
STANDBY/ON
POWER
STANDBY/ON
2 Press the STANDBY/ON button.
The STANDBY indicator goes out and the display
panel lights.
ANDBYST
POWER
OFF
ON
STANDBY/
ON
The STANDBY indicator
turns off.
STANDBY indicator
Operations
ANDBYST
STANDBY/ON
DX-R700 RC-448C