Onkyo CDR-205X CD Player User Manual


 
32
Finalization
The finalization process writes the TOC data (tracks,
etc.) for the disc in a special area on the disc called
the PMA.
After finalization
CD-Rs can be played in CD players. Even after
finalization, CD-RWs can only be played on CD
players that are compatible with CD-RWs.
For finalized CD-Rs, you cannot add more
recordings, place SKIP commands, or remove SKIP
commands.
1 Insert the CD-R or CD-RW to be finalized
into the CDR-205X.
2 Press the FINALIZE button.
AUDIO CD RECORDER
ON
/
OFF
STANDBY
CDR-205X
CD DUBBING
DISPLAY
PUSH TO
ENTER
()
AMCS
REC
FINALIZE
INPUT
EDIT/NO
YES
DUAL OPTICAL INPUT
FINALIZE
YES
Memo:
If the CDR-205X is left in the finalize standby
state for more than 10 minutes, then it will
automatically exit the state and return to normal
operation.
3 After the time information appears,
press the YES button.
Finalization begins. During finalization, the
remaining time is displayed. (Finalization takes
approx. 4 minutes.)
FINALIZE
YES
When finalization finishes
The CDR-205X automatically stops.
To stop the finalization process
Press the e button (before pressing the YES button
in step 3).
Display after finalization
For CD-Rs, the display becomes that for CDs. For
CD-RWs, the display does not change, except that
FINALIZE is added.
Notes:
Never turn off the power or remove the
power cord during finalization. Doing so
may damage all the data on the disc.
If the power is turned off by mistake or if a power
outage occurs, the remaining operations will
resume when power is turned back on. However,
there are times when the operations are not
properly resumed and the disc is not restored.
Never finalize discs that are scratched, dirty, or
dusty. Doing so may prevent the process from
being properly completed. If the process does
not finish in 10 minutes, press the e button and
abort the process. This disc will not be able to be
played with normal CD players.
During finalization, the operation button on the
CDR-205X will be disabled.
FINALIZE