Filter
Top Products
20
CD dubbing (component system operation)
Perform CD dubbing to digitally record all the tracks
from a music CD to a CD-R or CD-RW. The dubbing
mode is selected at the EDIT menu.
Preparation
• Turn on the CDR-205X (see page 15).
• Place the music CD in the CD player. (Refer to
the instruction manual for the C-707CHX).
• Place a recordable CD-R or CD-RW in the CDR-
205X (see page 16).
1 Repeatedly press the INPUT button
until "Digital In1" appears.
Note:
CD dubbing cannot be performed when "Digital
In2" or "Analog In" is selected.
YES
3 Press the YES button.
The current dubbing mode appears.
Notes:
• In the fade mode, only the remaining recording
time is displayed.
• When recording to a CD-RW in the album mode,
the remaining possible recording time is not
displayed.
2 Repeatedly press the EDIT/NO button
until "CD DubMode" appears.
The current dubbing mode is given on the left
side (for the display given above, the current
dubbing mode is the album mode).
Album: Only record the tracks that can be
completely recorded. (Album mode)
Fade: Fade-out a track if it cannot be
completely recorded. (Fade-out mode)
4 To change the dubbing mode, press the
YES button.
The new dubbing mode is set. To not change
the dubbing mode, press the
EDIT/NO button.
INPUT
EDIT/NO
AUDIO CD RECORDER
ON
/
OFF
STANDBY
CDR-205X
CD DUBBING
DISPLAY
PUSH TO
ENTER
()
AMCS
REC
FINALIZE
INPUT
EDIT/NO
YES
DUAL OPTICAL INPUT
INPUT
CD DUBBING
EDIT/NO
YES
YES