Filter
Top Products
22
Synchronous recording (component system operation)
AUDIO CD RECORDER
ON
/
OFF
STANDBY
CDR-205X
CD DUBBING
DISPLAY
PUSH TO
ENTER
()
AMCS
REC
FINALIZE
INPUT
EDIT/NO
YES
DUAL OPTICAL INPUT
POWER
TIONOPERA
RANDOM
MEMORY
TREPEA
REC
123
4
5
6
7
8
9
10
/
0
>
10
SKIP ID
CLEAR
CLEAR
SET
DISPLAY
SKIP PLAY
CLOCK SLEEP
EFFECT
G.EQUALIZER
TUNER
MODE
POWER
FM AM INPUT
PRESET
TAPE
DVD
PAUSE/STEP
MD
CD
SCROLLREPEAT
CLEAR
PLAY MODE
RANDOMREPEAT
REC
CLEAR DISCMEMORY
CDR
REPEAT
TIMER
UP/DOWN
ENTER
CLEAR REC
PLAY MODE
TONE
123
456
789
--/--- 10/0
MUTING
VOLUME
PRESENCE
OFF 1 2 3
ACOUSTIC
REMOTE CONTROLLER RC-414S by
RC-413C
INPUT
REC
o
n
s
s
REC
o
o
REC
RC-414S
When connected to a component system, the
synchronous recording operations
given below are possible.
• Synchronous recording from the CD player to
the CDR-205X.
• Synchronous recording from the MD recorder or
tape deck to the CDR-205X.
• Synchronous recording from the CDR-205X to a
MD recorder or tape deck.
Synchronous recording from a CD
player to the CDR-205X
Preparation
• Turn on the CDR-205X (see page 15).
• Place the music CD in the CD player. (Refer to
the instruction manual for the C-707CHX.)
• Place a recordable CD-R or CD-RW in the CDR-
205X (see page 16).
1 Repeatedly press the INPUT button
until "Digital In1" appears.
For analog recording, select "Analog In."
Note:
Synchronous recording cannot be performed
when "Digital In2" is selected.
2 Adjust the recording level
(see page 29)
3 Press the o REC button (or the remote
controller REC o button).
“Rec Setup” appears in the display followed by
the time display (the recording standby state).
When the CD finishes
The CDR-205X automatically returns to the
recording standby state.
To stop the CD synchronous recording
Stop play at the CD player. The CDR-205X enters the
recording standby state.
Note:
During analog recording, set the input dial on the
amplifier to the CD position and be sure not to
change this setting during recording. If this setting is
changed, the CDR-205X will automatically enter the
recording standby state.
4 After the CDR-205X enters the
recording standby state, press the s
button at the CD player.
The CD player starts playing and recording starts
at the CDR-205X.
INPUT
REC
REC
REC
CDR-205X RC-413C RC-414S