Filter
Top Products
A/V PRESETS
The T 175’s simple but powerfully exible system of “Presets” allows you to customize virtually every
aspect of your audio-video playback, and recall them with a single key-press. The parameters “Listening
Mode”, “DSP Options” and “Tone Controls” accessible via the “Main Menu” together with “Speaker Setup”
and “Display Setup” congurable through “Setup Menu” are stored together as a single Preset.
You might create one Preset optimized for pop music and another for classical. One more Preset can
be set up to recall each family member’s favorite setting or one for fully cinematic home-theater
playback and yet another one for late-night movies, with each Preset ne-tuned to a particular
scenario or preference.
CREATING PRESETS
Creating a Preset consists simply of storing a complete set of the parameters set forth in the “Listening
Mode”, “DSP Options” and “Tone Controls” accessible via the “Main Menu” together with “Speaker Setup”
and “Display Setup” congurable through “Setup Menu”.
Scroll to “A/V Presets” using the [ ] keys to save a collection of said parameter settings to a
Preset number and by a combination of pressing the [ ] keys, you can selectively include in the
particular Preset any of the above-mentioned parameter settings by choosing “Yes”. If you decide not
to include in the particular Preset a certain parameter setting, select “No”.
Now in order to save the settings chosen for the particular Preset number, scroll down to “Save Current
Setup to Preset” and press the [ ] key. If you chose to load instead the default settings, scroll down to
“Load Defaults to Preset” and press the [ ] key to restore the default settings.
In addition to the parameter settings, the Preset label itself can be assigned a new name. This new
Name will be shown in the VFD as well as on the OSD.
To rename the Preset label, scroll to “Name” and press [ ] to go the character. Then, press [ ] to
pick and select through the alphanumeric selections. Press [ ] to move to the next character or
back to the previous character and at the same time save the changes done on the current character.
NOTE
The selected Preset remains in force until you select a dierent Preset.
RECALLING PRESETS
You may recall a Preset at any time using the HTRC 1 remote control.
Press the HTRC 1’s AV PSET key and then the numeric key 1-5 corresponding to the desired preset
number. The newly recalled Preset will then manifest or replace the previous Preset (if any).
OPERATION
USING THE T 175 SETUP MENU
29
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ