Technical information 32
562 User Guide
• The lowest noise contribution from the analogue–digital converter.
• The best loudness match when switching from LP to other sources.
However, under many circumstances you may prefer to set 562 to a lower
sensitivity
– i.e. larger number in Gain – because you prefer the sound
overall. The reason is that the analogue–digital converter has such a wide
range compared to the surface-noise of LPs, that you can allow more
headroom (for very short clicks due to dust etc.) without any noise
penalty. This alternative fitting of the available dynamic-range of the LP
signal into the 562 input ‘window’, can give better sound overall but at the
expense of level matching between sources.
Tip Start at the 2dB setting.