Filter
Top Products
Customising 562 using Config 22
562 User Guide
None If you select the logo ‘N’ the 562 will ignore that key on the Remote
control and that source will not be offered in the Normal source menu.
Changing the input for a source
In Config mode:
1. Press Source until you see a Remote-key (source) + logo display like
2. Press Source until the Remote key name for the source you wish to
configure is displayed.
3. Press Display.
you should see the display change to one like:
The Remote control key you are setting up is the source name and it is
indicated on the left as before. Now the letters on the right indicate which
physical input connector will be selected.
A full list of physical inputs and their labelling is:
D1
Digital 1, CD
A1
Analogue 1,
D2
Digital 2,
A2
Analogue 2,
D3
Digital 3,
A3
Analogue 3,
D4
Digital 4,
A4
Analogue 4,
D5
Digital 5,
A5
Analogue 5,
A6
Analogue 6,
DAC A7
Analogue 7,
To change the physical inputs:
1. Use the
and Volume keys until the correct one is indicated
2. Make changes for all the source options by pressing Source.
Note When customisation is complete, switch the power off and then on
again to restore Normal mode and to save what you have done.
Changing the second input for a digital source
In Config mode:
1. Press Source until you see a Remote-key (source) + logo display like
2. Press Source until the Remote key name for the source you wish to
configure is displayed.
3. Press Display twice.
you should see the display change to one like:
The Remote control key you are setting up is the source name and it is
indicated on the left as before. Now the letters on the right indicate which
analogue input connector will be selected when a digital source like CD is
required on the analogue tape outputs (no DAC fitted).
In this display E means Extra input and to use it you have to connect an
analogue output from the source to one of the analogue inputs A1–A7. E1
means use A1 as an extra input and so on.
1. Use the
and Volume keys until the input you want (E1–7
corresponding to A1–7) is indicated
2. Make changes for all the source options by pressing Source.
CD CD
CD D1
CD CD
CD E1