Filter
Top Products
Customise 562 using Type 17
562 User Guide
• Source-Logo-input mapping as shown below.
Source Logo Input 2nd i/p Gain Comms
type
CD CD D1 A2 2.5V 1
Radio RD A3 N 2V 2
LP LP A1 N +2dB –
TV TV A4 N 1V –
Tape1 T1 A5 N 2V –
Tape2 T2 D2 N – –
CDR CR D3 N – –
Cable Cb A6 N 1V –
Text Tx LV
2
N n/a –
VCR1 V1 A7 N 1V –
VCR2 V2 A6 N 1V –
LD LD A4 N 2V –
Selecting Types
1. Switch off any power amplifiers that are connected to 562.
2. Switch off the 562 using the power switch on the back.
3. While pressing the Off key on the 562 front panel, switch the power on
again. The display will read:
4. Release the Off key
5. Use the front-panel
and Volume keys to move the selection
between Types 1 – 9.
6. When you have the Type you want displayed, wait one second for 562
to action the choice.
7. Switch off the 562 using the power switch on the back.
8. After half a second, switch the 562 power on again to restore Normal
mode.
Type
1