Filter
Top Products
Using the Remote control 11
562 User Guide
Advanced operation using the Remote Control
Balance control
The balance can only be adjusted from the Remote control.
Note 562 only has a balance feature if you have fitted the optional DAC
module and correctly configured the unit. See page ?? for more details.
Note When 562 is set up for use with D600 or D6000; volume, balance,
phase and mute are handled by the speaker and 562 will not respond to
the Remote control.
To move the sound to the left
1. Press Left
The display will show the current balance, e.g.
The number indicates the number of dBs
advantage given to the left channel.
To move the balance back again
1. Press Right until the display says:
or
Press Reset (also only on the Remote control)
To move the sound to the right
1. Press Right
The display will show the current balance, e.g.
The number indicates the number of dBs advantage
given to the right channel.
Note When 562 is set up for use with D600 or D6000; volume, balance
and mute are handled by the speaker and 562 will not respond to the
Remote control.
←←
1
←←
0
→→
9→→