Filter
Top Products
Customise 562 using Type 16
562 User Guide
A full customising process
A full customising process will generally involve using all the configuring
modes of 562. A full procedure is as follows.
1. Change to Type and select the configuration closest to your
requirements.
2. Change to Config and make choices about:
• keys, displays, inputs.
• control options
3. Change to Gain and make choices about:
• analogue input sensitivity.
4. Change back to Normal.
Making changes to an existing setup
Config and Gain are configuration editing modes, they do not reset on
entry. Type however performs a full reset of all parameters.
To make any changes to your custom configuration:
1. Change to Config or Gain – whichever is appropriate,
2. make the changes you want,
3. change back to Normal.
Customising using Type
Type is a mode used specifically to setup 562 into one of nine factory-
preset configurations. Type resets the following for all six Types.
• Balance to central.
• Depending on the Type selected, the communications settings will be
as follows:
Type Mode DAC ? Sources CD ?
1 500 N 12 –
2 200 N 8 Y
3 500 N 6 –
4 500 N 8 –
5 500 V
1
12 –
6 500 V
1
8 –
7 500 T
1
12 –
8 500 T
1
8 –
9 200 N 8 N
For an overview
of Type, see
page
13
.