Filter
Top Products
12
How to Connect for a Second Room
How to Connect for a Second Room
1. Connect Audio Cables from the C2200 Balanced OUT-
PUTS 2 to the Second Power Amplifier Balanced In-
puts.
Notes: The unbalanced Audio OUTPUTS 2 and unbalanced
Power Amplifier Inputs may be used instead of the
Balanced Connections. When a second room is
connected, it is sometimes desirable to switch Off the
Loudspeakers in the Main Listening Room. This can be
accomplished by connecting the Main Power Amplifier
to the C2200 OUTPUTS 1 instead of the MAIN
OUTPUTS, so that they can be switched Off by the
Front Panel OUTPUTS 1 Push-button.
2. Connect a Control Cable from the C2200 POWER
CONTROL 2 Jack to the Power Control In of a McIn-
tosh Power Amplifier.
Right
Loudspeaker
4 ohms
Left
Loudspeaker
4 ohms
McIntosh Power Amplifier
Keypad
3. Connect an RG6 or RG59U coaxial cable from the
EXTernal SENSOR Jack to a Keypad.
Note: A Wall Mounted IR Sensor may also be used in place
of the Keypad.