Filter
Top Products
4-10
Controls & Modes Mark Levinson
7. Press and hold the front panel or remote control setup button
until the Name parameter for the selected input opens on the
front panel display as shown to the left.
• The front panel setup LED lights red to indicate that the
setup menu is open.
8. Press the front panel or remote control enter button once to
select the Name parameter and access the custom names list.
• The current input name will blink on the front panel
display as shown to the left to indicate that a new input
name can be selected from the custom names list.
9. Rotate the front panel volume knob or press the remote
control volume ± buttons to scroll through all custom input
names until the SSP name appears on the front panel display
as shown to the left.
10. Press the enter button to select the SSP name, which activates
SSP mode.
• The SAVING DATA message will appear on the front panel
display as shown to the left to indicate that the SSP name
is being saved.
SSP (Surround Sound Processor) Mode (continued)
Name=INPUT 1
Name=_______
Name=SSP
SAVING DATA
Input 1 is used
here as an example
and may be substi-
tuted for whichever
input was selected
in step 3 (page 4-9).